28r> /TABLE>

 

 
          Surplus Machine Tool - used manufacturing machinery
        inventory* under power at 11131 Excelsior Blvd, Hopkins, MN 55343 (USA) - unless otherwise noted
          smt25@comcast.net (e-mail)                                         weather: global views or USA/regional
          651-731-1969 (phone/fax)                                             measures conversion, currency converter
          651-283-7444 (cell/mobile)                                            language translation, global timezones
                 internet archive (wayback machine),  debt clock . . .  ThomasJefferson (1789 letter to Madison),   Abraham Lincoln quotes

                           link to main page with "new additions" & "current inventory"

 

Sold Machines
          10 hp air compressor: Quincy 350/20, 6 x 3-1/4 x 3-1/2 piston type, motor starter, Stoddard silencer* (MN)
          10 hp air compressor: Champion HR10-8, two stage, four cylinder, 60 gallon tank, 220/3/60, no motor starter* (MN)
          15 hp  air compressor: Devair (DeVilbiss) VAVC-5000 piston type, 52 cfm, 175 psi, sound enclosure, no tank, model 447 "V", four cylinder, 440/3/60, 1027 hours use, 2001* (MN)
    30" x 48" autoclave: Anchor Autoclave AC sterilizer, 400F @ 50 psi (full vacuum @ 300F), 7.5 KW heater, 1 hp vacuum pump, Reimers RH-20 20 KW steam generator, hyd. single hinged door, locking ring, cart, Watlow temp & overtemp controls, Partlow MRC7000 chart recorder, manual/automatic, never in production, 300# load capacity,, 20" x 48" cart,, 1/4" shell, 5' x 9' footprint, new 2002*
            3/4" auto screw machine: Brown & Sharpe #2, dynabrake, dual slide, bar feed, gears, 1964*  (IL)
             24" back gauge: rear operated, micrometer handwheel* (MN)
     42" x 22" baler: E.P. Baler, model P244, light duty, 42" x 22" x 32" bale, hydraulic, 32" x 54" x 105" high* (MN)
    18 gauge beader: Pexto 0617-A, rotary crimp & bead, dies, hand crank operation, extra dies, Feb-60* (MN)
    18 gauge beader: Pexto 3617, rotary crimp & bead, powered, extra rolls, foot pedal, excellent, 1999* (MN)
         1-1/2" bender, power: Diacro #8, hydraulic, 1" solid, 1-1/2" tube (16 ga wall), 24" maximum radius, 3500# torque with 4" cylinder, 3 hp, 208-220/3/60, 1150#, Control-A-Bend, s/n - 1-1071* (MN)
              9" belt sander: Engelberg vertical, tilt table, 3 hp, 220/440/3/60, $850.00* (MN)
              9"  belt sander: Porter Cable vertical, tilt table, 3 hp, 220/440/3/60, $850.00* (MN)
bender, manual: Diacro #3 rotary, dies* (MN)
blast cabinet: Vacu-Blast 200-P, 35"W x 21"H x 24"D, 20" x 21" part size, 1/2 hp blower, 1981* (MN)
        6-1/2" blasthole drill: Ingersoll Rand DM45, Cummins 600 hp diesel (3000 hours on complete rebuild), 5 rod carousel (25' steels), crawler mounted (hard rock carriage), hydraulic top hammer, rotary head (new gears 2006), 1200 cfm air compressor, hydraulic outriggers, extra 48" Dominator hammers & extra long life 6-1/2" button type drill bits, sub extender, 9130 hours, 13'1" W x 29'L x 15'6" H, 80,000#, controls in cab, excellent condition (7-8 on scale of 10), under power, 1999* (US)
 1200#/hour blaster, dry ice: Cold Jet D6520100M cryogenic blast system, (2) 600#/hour pelletizer barrels make .140" (3.4 mm) soft pellets, 100- 350 psi air propellant operating pressure, maximum CO2 temp of 0 degrees F, surge tank, heat exchanger, with hoses, nozzles, etc., 460/3/60, 37 amp, new 1991, 30 hours use* (MN)
    350 MBH boiler: Slant Fin "Galaxy", model GG350HEC, 350,000 btu natural gas, hot water to 240F, cast iron, (Caravan) for tandem use, natural draft, surge tanks, 1999* (MN)(2)
   12 gauge brake, apron: Dreis & Krump, model SB612, 73" bending length, excellent condition, 2275#, new 2001* (MN)
   8' x 3/16" brake, box & pan: Dreis & Krump PBP-8187-8, mechanically powered, full set of fingers, dual operator consoles, 1981* (MN)
       25 ton brake, press: Diacro 16-72, hydra-mechanical, 6' x 16 ga, two speed, front operated back gauge, 1970* (MN)(2)
       25 ton brake, press: Diacro 16-72, hydra-mechanical, 6' x 16 ga capacity, two speed, front operated back gauge* (MN)(2) 
       35 ton brake, press: Diacro 14-72, hydra-mechanical, 6' x 14 ga capacity, two speed, front operated back gauge, 1970* (MN)
       40 ton brake, press: Pacific 40/8 hydraulic, 8' overall, 8' x 14 gauge capacity, 6-1/2' between housings, die rail, dual footswitches, micrometer limit switches, 6' punch & die, 230/460/3/60, wired 460 volt, 1970* (MN)
       90 ton brake, press: Verson 206-65 mechanical, 8' overall, 6'6" between housings, 8' x 10 gauge, die rail, Automec Autogauge CNC 1000 control, data plate, 24" back gauge, 440 volt, 1968* (MN)
        5 ton bridge crane: underhung, Hoist Equipment, 30' span, double girder, 20' lift, Detroit M10XL hoist, Smooth Move AC variable speed drives, pendant* (MN)
         5 ton bridge crane: Dearborn, 37' span, single girder, underhung, 20' lift, Detroit hoist, pendant, 1997* (MN)
       10 ton bridge crane: Hoist Equipment 36'6" span (wheel to wheel over runway), double girder, top running, pendant/radio, Robbins & Meyers hoist, 22' lift, 37'5" span overall, 9'4" end truck width, 1989* (MN)
       10 ton bridge crane: Hoist Equipment 36'6" span, double girder, top running, pendant/radio, Robbins & Meyers hoist, pendant, 22' lift, 11 fpm, 50 fpm speeds, 37''5" span overall, 1989* (MN)
        10 ton bridge crane: Orley Meyer-Shepard Niles, 37'8" span (between crane rails), double girder, top running, 10'3" wide end trucks + 7" of bumpers), low headroom hoist, 4' overall height, 38'7" overall span, pendant/radio, 20' lift* (MN)
        10 ton bridge crane: TM Equipment 36'6-1/2"" span, 8'4" wide, AC, double girder, top running, 15' lift, Shaw Box 72D10-015S13 hoist, 13 fpm, pendant/radio, 12,000# overall weight, 1,800# for hoist, 37'2" overall span, 1996* (MN)
        10 ton bridge crane: TM Equipment 37'5" span, 8'4" wide, AC, double girder, top running, 15' lift, Shaw Box 72D10-015S13 hoist, 13 fpm, pendant/radio, 12,500# weight, 1800# for hoist, 38'1/2" overall span, 1997* (MN)
       15 ton bridge crane: top running, Dearborn, 36'1" span (between crane rails), AC, top running, double girder, pendant, R&M Spacemaster D8-15-31 (s/n - 158587VB1) low headroom hoist, 10 hp, 3/4 hp trolley motor, 20' lift, 5' overall height, 36'1" across end truck wheels, 36'11-1/2" overall span, 1988, pendant, radio control on crane, 208/230/460/3/60* (MN)
       15 ton bridge crane: top running, Shepard Niles, 33' span (between crane rails), top running, double girder (11'1'" wide end truck + 4" of bumpers), 4' overall height, 34'1" overall span, low headroom hoist, 4' overall height, hoist and hook, pendant, 17'4" lift, 16,280#, 40 fpm bridge & trolley, 14 fpm hoist, 1967. s/n -  67266* (MN)
       15 ton bridge crane: Zenar Milwaukee, 36' span, top running, double girder, class C, 20'2" lift, 10 fpm hoist, 50 fpm bridge & trolley, pendant. 11,800# bridge, 3800# for hoist/trolley, 7'2" end truck wheelbase, 9'6" overall width, soft start, 460/3/60, runway available, 1987* (MN)
        15 ton bridge crane: Zenar Milwaukee, 36' span, top running, double girder, class C, 20'2" lift, 10 fpm hoist, 50 fpm bridge & trolley, pendant. 11,800# bridge, 3800# for hoist/trolley, 10'1" overall end truck width, soft start, 460/3/60, runway available, 1989* (MN)
        15 ton bridge crane: Zenar Milwaukee, 36' span, top running, double girder, class C, 20'2"' lift, 10 fpm hoist, 50 fpm bridge & trolley, pendant. 11,800# bridge, 3800# for hoist/trolley, 7'2" end truck wheel base, 9'6" overall width, soft start, 460/3/60, runway available, 1987* (MN)
        15 ton bridge crane: Zenar Milwaukee, 36' span, top running, double girder, class C, 20'2" lift, 10 fpm hoist, 50 fpm bridge & trolley, pendant. 11,800# bridge, 3800# for hoist/trolley, 10'1" overall end truck width, soft start, 460/3/60, runway available, 1989* (MN)
        20 ton bridge crane: Orley Meyer-Shepard Niles, 36'6'" span, double girder (12'2" wide, 30" tall I-beams), top running, 15' lift, Shepard Niles MDB hoist, 20 hp, low headroom, 5' overall height, pendant, 12' wide bridge, end trucks, 1970's* (MN)
        25 ton bridge crane: top running, Detroit Hoist, 36' span, AC top running, double girder (33" tall x 12" flange), 15' lift, new 1985, 9'8" wide end trucks (9' between wheels), shortened from 45'* (MN)
           220' bridge crane runway: 220' (x2) of 18" tall I-beam, 7-3/4" wide flange, 12" wide channel, J-bolts, 30' lengths of crane rail, electrification, (20) 19'11-1/2' beams, (2) 21'11-3/8" beams with runway end stops* (MN)
           250' bridge crane runway: 250' (x2) of 18" I-beam, channel iron, J-bolts, top rail, electrification, under 10 ton crane* (MN)
           550' bridge crane runway: top running, W24x84 I-beams (18" I-beams sold), 9-1/4" flange, 19'11-1/2" beams, 40' beams, 12" & 15" channel cap, J-bolts, 4" crane rail, electrification, for 20 ton cranes* (MN)
           720' bridge crane runway: underhung, TC/American 3RH20-67, 20" tall x 1/2" web, 13" x 5/8" top flange, 3-1/4" (hardened) bottom flange, drilled & painted, 66.5#/foot, 47,880#, (24) 30' I-beams, 360' of double sided* (MN)
        2000# bridge crane, stacker: Stanley Vidmar Stak system, (80) 42" x 42" adjustable pallets, (4) 16' deep x 4 bay sections, (2) 15' wide stacker cranes with forks, 12' lift, 1985* (MN)
           5 hp buffer: Hammond 18-A double end buffing/polishing lathe, 84" between tips, 1-1/4" arbors, (2) 5 hp motors, independently variable speeds, hand brakes, backstands with tension controls, guars, 230/3/60* (MN)
           5 hp buffer: Hammond 5-VRROW-B double end buffing/polishing lathe, 96" between tips, 1-1/4" arbors, (2) 5 hp motors, 750 - 1500 rpm (independently variable), hand brakes, backstands with tension controls, 230/60* (MN)
     7-1/2 hp buffer, double end: Hammond 7VRO-D, 1000-2000 rpm (variable speed), 1-1/4" arbors, 48" between tips, 7-1/2 hp, wheel guards, common base, 460/3/60, Torit dust collector, s/n-14021, $5,000.00* (MN)
     500 pps camera, high speed: NAC HSV-500 color VCR, control pendant, HSV-500 (model 120) high speed video camera, 125, 250 & 500 pictures per second, controls, f/1.6 aperture, 25 lux @ 250 fps (F4), 43 minute recording, Panasonic TV, Canon V6x10 18-100MM zoom lens, Fujinon CL11052 close-up lens, cart, camera powered up, 1997* (MN)
     48,000# chains: crane sling, four 72" chains, 5/8" hook, no tags* (MN)
          5 ton chiller: Liebert Challenger 3000, 65F-85F temperature, 20%-80% humidity, scroll compressor, microprocessor control, audible/visual alarms, 1.5 hp evaporator fan, model BU102C-AA00, air filtration,460/3/60, 2001* (MN)
        10 ton chiller: Schreiber 1000AC, dual stage (2) 5 ton systems, 70 gallons/minute, 120,000 btu, 85 gallon (stainless) fluid reservoir, 3 hp compressor, digital electronic control, low level warning, 1700# weight, 1999* (MN) 
        90 ton chiller: Advantage "Titan" TI-90W 43SRX central chiller, glycol water cooled, semi hermetic compressors (3 refrigerant zones), 101# R-22, refrigerant gauges, 100 psi pressure controls, 7.5 evaporator pumps, 25 hp pumps (process & standy), 20F - 60F temperature, 460/3/60, 29 amp, mild steel coolant reservoir, new 9/1997* (MN)
      320 ton chiller: Trane Earthwise CenTraVac, model CVHE450, water-cooled liquid chiller, 700# HCFC-123 refrigerant, 180KW, 480/3/60, purge, three-stage single compressor, condenser & economizer, 9416 hours compressor run time, 686 starts, Cutler-Hammer intelligent soft start, very clean, 450 ton compressor, rated 300 ton with glycol, new 4/2003* (MN)
    1060 ton chiller: Trane Earthwise Centravac, model CVHF1060, water-cooled liquid chiller, 2200# HCFC-123 refrigerant, 1000 ton @ 591 KW, 480/3/60, purge, two-stage single compressor, condenser & economizer, 869 hours compressor run time, 81 starts, Cutler Hammer intelligent soft start, very very clean, new 4/2003, stretch wrapped* (MN)
            26" chip wringer: Tolhurst, 2.85 cubic foot capacity, 250# capacity, basket locking cover, 3 hp, new motor starter & 110 volt transformer* (MN)
            18" cleaning, printed circuit board: Speedline Accel "Microline", 18" wide conveyorized belt, precision (non-contact/inline) for delicate semiconductor components/wafers, automated in-line spray with on-board water recycling, wash/soak control, under belt wash, under belt rinse, carbon & DI resin filter cartridges, control, self contained, 1997* (MN)
    16" x 24" cnc lathe: Wasino LJ-6, 3500 rpm, 8.625" dia workpiece, 3.34" spindle bore, tailstock, chip conveyor, 12 station turret, 12" 3-jaw hydraulic chuck, Fanuc O-T, 22 hp, 1990* (IL)
       2,000# coil cradle/straightener: Littell 408-C-20, 8" x .187" straightener, 1959* (MN)
          150# coil reel: Rapid-Air R34AP, 4" stock width, 24" o.d., backplate, dancer arm, manual expansion, DC motor, payout/rewind, 120/1/60, 2000*
          250# coil reel: Rapid Air RT-3 coil reel, single end, motorized, 7" width, 30" backplate, 1" & 1-1/2" arbors, variable speed, hydraulic brake, reversing, one with recoil spool* (MN)(2)
          500# coil reel: PA Industries VR coil reel, single end, motorized, dancer arm/loop control, 4" width, 36" backplate, 198x* (MN)
       3,000# coil reel: Bradbury 300SR, single end, plain, 24" width, manual expansion, drag brake, 1994 (OH)
       3,000# coil reel: Bradbury 300DE, double end, plain, 24" width, 16"-20" i.d., 60" o.d., keepers, manual rotation & expansion, 1994* (MN)
       4,000# coil reel: Littell 40-24, plain, 24" width, 60" o.d., manual expansion, electric brake, 1987* (MN)
       6,000# coil reel: Littell 60-24, plain, 24" width, 60" o.d., 16" - 20" i.d., manual expansion, electric brake, 1977* (MN)
       6,000# coil reel: Littell 60-24, motorized, 24" width, 60" o.d., 16" - 20" i.d., manual exp, electric brake, 1977* (MN)
       8,000# coil reel: Cooper Weymouth Peterson 4RM24, motorized, 24" width, 60" o.d., 13" - 17" i.d., manual expansion, sliding hold down arm, air brake, 1993* (MN)
           18" conveyor: EMI 5CLR-18, pedestal type, 4' length, adjustable height, 0 - 20 degree incline* (MN)
  30 cubic ft corrosion test chamber: Q-Fog CCT1100, 36" x 58" x 16" deep, moisture/salt spray/temperature & prohesion, microprocessor for cyclic control (fog/dry-off/100% humidity/dwell), 1100 liter, 120 liter solution reservoir, all plastic construction, accepts (200) 4" x 12" samples, 1996* (MN)
       4 cu ft cryogenic deflasher: Cryogenic Systems LCC6000, belt style, freezes parts to -205F with liquid nitrogen, 12" throwing wheel - shot blasts/deflashes with plastic media, 3-5 minute cycle time, uses 1# of nitrogen for 1# of parts, SOI control, media feed auger, MD100 7.5 KW dryer, dust collector, 24" Sweco separator, vibratory unload tray, stainless cabinet, 3" urethane insulation, low hrs, 1999
    28" x 38" die cutter: Standard Paper Box, "Econocut" clamshell or clicker press, open/closed/dwell timers (0-15 second), 15-25 strokes per minute, fixed & rocking platens, Bijur lube, triple micrometer impression adjustment, AB Micrologix 1000 PLC, color touch screen, electromagnetic clutch, 5 hp variable speed drive, 480/3/60, 7,200#, low hours, double helical gears, 2005* (MN)
    28" x 38" die cutter: Standard Paper Box, "Econocut" clamshell or clicker press, open/closed/dwell timers (0-15 second), 15-25 strokes per minute, fixed & rocking platens, Bijur lube, triple micrometer impression adjustment, AB Micrologix 1000 PLC, color touch screen, electromagnetic clutch, 5 hp variable speed drive, 480/3/60, 7,200#, low hours, double helical gears, 2005* (MN)
    29" x 42" die cutter: Standard Paper Box, "Excalibur" clamshell or clicker press, open/closed dwell timers, .937" high cutting rule, chaseless dies, triple micrometer impression adjustment, color touch screen, screens: cycle, indicator light, main, text message, timer, AB Micrologix 1000 PLC, air clutch & brake, 5 hp variable frequency drive, motorized lube, 208/3/60, 7' x 7' x 5'H, (10,500#), fixed & rocking platens, helical gears (both like new, factory rebuilt 2007* (MN)
       15 ton die cutter: Preco 1212C, hydraulic press, C frame, 0"-4" stroke, micrometer adjustment, 12" x 12" bolster, 230/3/60, Series 104 control, aftermarket feeder, 2000* (MN)
       25 ton die cutter: Herman Schwabe D, swing-arm clicker press, 3" stroke, palm buttons, 1980* (MN)
       30 ton die cutter: Samco GTH, model TH-35 2075, travelling head, joystick controller, 6" stroke, 1" - 7" daylight, 30" x 30" cutting platen, 30" x 79" between uprights, 65" ram travel (left/right), hydraulic, 3.2 hp motor (230/460/3/60), 64 litres Mobil DTE 26, 460/3/60, 2200 kg, 29-1/2" x 74" platens, 1996* (MN)
       40 ton die cutter: Preco 1320-L, 4-post, hydraulic, 13" x 20" cutting area, 2" stroke, micrometer adjustment, dual drive, front & rear roll feeds, SBCIII control, jog/speed/direction, hydraulic, light curtains, die clamps, electrical cabinet, 21334 hours, 460/3/60, 1995* (MN)
die storage rack: Better Concepts, (6) 36" x 36" roll out shelves, 2000# capacity/shelf* (MN)
           30" drill, gang: Cleereman 4-spindle gang on 6-spindle base, 7-1/2 hp 30C heads, 50-1000 rpm, power downfeeds, 24" x 156" T-slotted table, 1954* (IL)
           30" drill, radial: Walker Turner, sliding overarm with tilt head, 26" x 18" table, 160-3800 rpm, 1/2 hp, 115/230/1/60* (MN)
     4' x 11" drill, radial: Ikeda RM1300, 1440 rpm, 5 hp, #5 morse taper, 1966* (MN)
     5" x 13" drill, radial: Ikeda RM-1575, #5 morse taper, 2-1/2" drill capacity, 30-1500 rpm, power elevation & clamping, tapping, coolant, box table, 13-5/8" column, 8800# weight, 89" x 36" x 91"H, 7-1/2 hp, 230/460/3/60, 1991* (MN)
           16" drill, single spindle: Electro Mechano 601J, bench base, 150-4000 rpm, hp, #2 Morse taper, 220/3/60, 1990* (MN) 
   2200 cfm dust collector: Rand-Bright 2200, wet type scrubber, used on flammable dust, 304 stainless body,  sound silencer, water level control, controls, 7-1/2 hp blower, 460/3/60, s/n - 1322-2671* (MN)
   1800 cfm dust collector: Torit SDF6 Downflo, 6 Ultraweb P191116-016-340 cartridges (103 sq ft), 618 sq ft filter area, pulse jet cleaning, Checkerboard control, 10 hp, 1997* (OR)
   4000 cfm dust collector: Torit DFT2-8, DownFlo II, 8 cartridge, 2032 square foot filter area, 7-1/2 hp, reverse pulse jet, 1996* (MN)
   4160 cfm dust collector: Dust Hog FJL-8-15-2H55, 8 cartridge, 2080 square foot filter area, 15 hp, reverse pulse jet, 1995* (MN)
   5400 cfm dust collector: Torit DFT3-12, 12 cartridge, pulse jet cleaning, 10 hp, breaker/reset/motor starter, 6-pin control for constant cleaning, separate cyclone, extra duct, 2000* (MN)
   8000 cfm dust collector: Torit DFT4-16, 16 cartridge, pulse jet, checkerboard control, 20 hp, 1998* (MN)(2)
 17000 cfm dust collector: Torit DFT3-36 Downflo II, 36 cartridge, reverse pulse jet cleaning, Checkerboard control, Acme 429M A/9 blower, 50 hp (estimate), supply duct, 1995* (OR)
   2.5 cu ft environmental chamber: Blue M WSP-109C MP3, air to air thermal shock chamber, 85C to 200C hot, -75C to 200C cold, 14" x 14" x 19" stainless chambers, LN cooling, Micristar controls, chart recorder, 1986* (MN)
      3 cu ft environmental chamber: Standard Environmental Systems STB/2C, -100F to 350F, Watlow 920 control, RS232 port, cascading R502 & R-503 condensers with direct LN2 injection, O'Keefe 311B compressed air drier, Acme 3 KVA transformer (240x480 primary, 120x240 secondary), 220/1/60, 1992*
      7 cu ft environmental chamber: Thermotron F-7-CHII-5-5 chamber, fits MTS 55 kip load frame, -100F to 300F temperature range, 15% - 95% humidity, 14" wide x 22" deep x 38" high chamber, 2 stage mechanical refrigeration with LN2 assist (21# R502, 5# R13), heat/cool rate to 15F/minute, (2) 5 hp compressors with head fans, 71 amp, 460/3/60, Thermotron 4800, controller, control features, manual, 1983* (MN)(2)
    10 cu ft environmental chamber: Tenney T10S, -40C to 200C temperature range, 24"W x 28"H x 27"D, 2000* (MN)
    10 cu ft environmental chamber: Envirotronics TSV6-2-2-30 air-to-air vertical thermal shock chamber, 24" x 30" x 25" deep basket elevates between -73C cold zone & 177C hot zone,  30 KW heater, water cooled, (2) 30 hp compressors, R-404 (low) & R-508 (high) refrigerant, GN2 purge in cold zone reduces coil icing, dual pen chart recorder, Systems Plus programmer/controller, RS232 port, 1.44 mb floppy, 200# part capacity, 460/3/60, 250 max circuit amps, stainless interior, electrics & schematics, 2000* (MN)
     12 cu ft environmental chamber: Ransco 16312, -73C to 177C temperature range, cascading mechanical refrigeration, air cooled, 27" x 27" x 27" chamber, R13 & R502 refrigerant, Copelametic 1-1/2 hp compressors, 4 KW heater, 230/1/60, LFE controller, two shelves, chart recorder, 1983* (MN)
     16 cu ft environmental chamber: Envirotronics SH16C, -68C to 177C temperature range, cascading refrigeration, (2) 1-1/2 hp compressors, R-404A , 20-95% humidity with Vaisala HMM30C solid state sensor, 3 KW boiler never used, Systems Plus controller, under power at -60C, 2 KW heater, 208 volt transformers, air cooled, 230/3/60, 1999* (MN)
    20 cu ft environmental chamber: Test Equity 1020C, -75C to 175C temperature range, 40"W x 34"H x 26"D chamber, R404A (non CFC) cascading refrigeration, Watlow F4 control, chart recorder, 2000* (MN)
    23 cu ft environmental chamber: Thermotron F-32/23-HM-705-705 chamber, fits MTS 110 kip load frame, -100F to 300F temperature range, 15% - 95% humidity, 19" wide x 30" deep x 68" high chamber (extendible to 90" high), 32 cu ft extended, 2 stage mechanical refrigeration with LN2 assist (23# R502, 10# R13), heat/cool rate up to 15F/minute, (2) 7-1/2 hp compressors, head fans, 91 amp, 460/3/60, Thermotron 4800, controller, 7' x 9' x 11' high, 1983* (MN)(2)
    27 cu ft environmental chamber: Blue M FRS-361G-1, 0F to 302F (-18C to 150C) temperature range, 36" x 36" x 36" stainless chamber, window, 5% to 98% humidity, Pro-Temp microprocessor controls, chart recorder,  single stage refrigeration, air cooled, 10# R-502, 2 hp compressor, water purifier, 7 KW heater, 1/2 hp blower motor, 480/3/60* (MN) 
    27 cu ft environmental chamber: Envirotronics SH-27, -22F to 350F temperature range, controls, R-502 mechanical refrigeration, 20% - 95% humidity, 36" x 36" x 36" chamber, window with wiper, air cooled, 1990* (MN)
    27 cu ft environmental chamber: Envirotronics SH-27, -68C/-90F to 177C/351F, R-22 & R-23, air cooled,  cascade mechanical refrigeration, 36" x 36" x 36" chamber, 20%-95% humidity, JC 600 two channel controller, chart recorder, 1/15 hp fans & wiring, Copeland KALB-0150-CAV-800 compressors, 230/3/60, 1993* (MN)
    27 cu ft environmental chamber: Russells Technical Products RB-27-3, -20C to 177C temperature, 36" x 36" x 36"  chamber, 22" x 22"  window, water cooled, 3 hp compressor, R502 refrigerant, 240/3/60, 12 KW heater,  side ports, chart recorder, Honeywell high & low limit controls, Watlow 920 control, 1995* (MN)
    30 cu ft environmental chamber: Envirotronics EH30-2-3, -67C to 177C temperature range, 48" x 48" x 48" chamber, 20% - 95% humidity, air cooled, (2) 3 hp compressors* (MN)
    31 cu ft environmental chamber: Thermotron F-31-CH-10-10-1, -100F to 350F, 36" x 36" x 40"H, double end, cascading refrigeration, (2) 10 hp compressors (9# R508B, 10# R404A), water cooled, side port, viewing window, Thermotron control, floppy, 208/3/60, 109 amp load, circulation fan), 7' LR x 5-1/2' FB x 8'4" H, 2002* (MN) (3)
    32 cu ft environmental chamber: Tenney T32RC-2, -73C (-99.4F) to 200C (392F), air cooled, cascading refrigeration, (2) 2 hp compressors (4.1# R-404A & R-23)2.5 KW heater, 20% - 98% humidity, 2 KW humidifier (1 gph), dual pen chart recorder, 230/1/60, window, glove ports, Versa Tenn V control, 36" x 40" x 38" chamber with light, communication ports, 50"W x 75"D x 86"H, 1600#, 2002* (MN)
    32 cu ft environmental chamber: Thermotron SM-32SL, -40C to 177C, R-502 refrigerant, water cooled, Thermotron 2800 control, 1991* (MN)
    32 cu ft environmental chamber: Thermotron SM-32S, -20F to 350F temperature range, 20% to 98% humidity, 38"x 38" x 38" chamber, Thermotron 2800 control, alarm, one or two channel, R502 refrigerant, side port, air cooled, unused, 1992* (MN) 
    36 cu ft environmental chamber: MVE Hanse TC-9 (Chart REAL-36), -100C to 150C, LN2 cooling (vacuum jacketed valve aseembly), 42"W x 38"D x 64"H, double-end/door, side ports, 60C/min. change rate, high speed blower option moves twice as much air, JC Systems 620A FasTRAC control, windows, 480/3/60, 1999 (2)
    64 cu ft environmental chamber: Despatch 16564,,, 48" x 48" x 48" chamber, -35C to 177C temperature, mechanical refrigeration, air cooled, 10% - 95% humidity, Watlow F4 control, window, chart recorder, R502 refrigerant (9#), 208/3/60, 9 KW/3KW heaters, 10 amp, 65" W x 74" D x 96" H, 1991* (MN)
    64 cu ft environmental chamber: Despatch EC2-64 Ecosphere, 48" x 48" x 48" chamber, -29C to 177C, 4C to 85C with humidity (10% - 98%), mechanical refrigeration, air cooled, remote condensor (compressor/receiver/condenser/controls), suggest installing double size receiver for cold climates, chamber base, Watlow 922 termperature control, chart recorder, window, R404A refrigerant, 2001 certificate of calibration, 2003 calibration, 65" W x 74" D x 96" H, dataplate, 1997* (MN)
      1-1/2" extruder: Killion KN-150, 24:1 L/D ratio, 45#/hour, DC drive, 7 heat zones, 12" film blowing die, rewind, 300  hours use, 1993* (MN)
     55 KIP fatigue tester: MTS 55 kip (312.31) frame, 55 kip load cell, Moog 72-102, 40 gpm valve, 162" tall frames fit 6.5 cu ft Thermotron chamber, 458 controller available (2)
     55 KIP fatigue tester: MTS 55 kip (312.41) frame, 55 kip load cell, dual 252 valves, missing service manifold, 189" tall frame fits 21 cu ft Thermotron chamber, 458 controller available
   110 KIP fatigue tester: MTS 110 kip (312.41) frame, 110 kip load cell, missing service manifold, 189" frame fits 23 cu ft Thermatron chamber, 458 controller available (2)
 30" x 120' filament winder: EnTec 5K30-144, 4-axis, 2000# mandrel capacity, tracking creel with 12 rovings,  Fibergraphix software, 1990* (MN)
 48" x 120" filament winder: EnTec 548-120-4, 4-axis, 4000# mandrel capacity, 0-133 rpm spindle speeds, 24 spool tracking creel, Fibergraphix, lengthened from 120" by EnTec, 26.5' overall, control, 1984* (CA)
  5 cu foot filter press: Pacific Press P800E132A-15, 900 mm, (31) 31.5" x 31.5" gasketed polypropylene plates, sidebar style press, center feed, four corner discharge, plate shifter, air/hydraulic closure, 4 hoppers, 155" x 50" x 75" high, 5567# weight, 42.3# plates, 1999* (MN)
 50 cu foot filter press: JWI 1200G32-39/87-50/111SYLC plate & frame press, 1200 mm, (40) 48" x 48"  gasketed polyethlyene plates, 989 square foot filter area, double auger conveyor, 2001* (MN)
       2500# forklift: Hyster H25XM Cascade, propane, 3-stage mast, 153.5" lift height, sideshift, 6 degree tilt, 42" forks, Mazda engine, solid tires, 650-10 front & 5.00-8 rear, 5700# weight, lab use, only 142.3 hours on meter, 1995* (MN)
       2500# forklift: Toyota FBE13 electric, triple stage mast, 3-wheel, 76" collapsed, 169" raised, small foot print, 24 volt battery, charger, 36" forks, good battery, s/n - FBE13-10231, 1979
       2700# forklift: Clark TW40, 36 volt electric, newer Drexel battery, 171" lift, sideshift, 36" forks, dataplate* (MN) 
       3000# forklift: Clark C-500-30, propane, hard tires, 3-stage mast, 42" forks* (MN)
       5000# forklift: Caterpillar M50LP, 36 volt electric, 42" forks, two stage mast, 130" lift height, non marking tires* (MN)
      6,000# forklift: White MA60, propane, hard tire, 2 stage mast, 42" forks, 1968* (MN)
      2000 F furnace, box: Lindbergh 52561-AP1-H200, 1100C, 20 KW electric, 230/3/60, 70 amp, 24"W x 18"H x 36"D, mold-a-therm encapsulated electric heating elements, Honeywell DCT-216 temperature & overtemperature controllers, single door, test run & ready to ship, 1993* (MN)
      2000 F furnace, box: Lindbergh 52661-P-B, 1100C, 26 KW electric, 240/3/60, 70 amp, 26"W x 25"H x 36"D, mold-a-therm encapsulated electric heating elements, Honeywell DCT-216 temp & overtemp controllers, single door, 1994* (MN)
       1850F furnace, carburizing: Leeds & Northrup Vapocarb, 7.2 KW 1850F & 3.7KW  1750F furnaces, controls* (MN)
      1250 F furnace, fluidized bed: Procedyne HT-1250-2032, 20" diameter x 32" deep pit (retort), aluminum oxide (120 mesh) bed material, fluidized gas (compressed air or nitrogen), 30 KW, 60 amp, 460/3/60,  Honeywell UDC3000 controls, chart recorder, GP-11 humidifier, methane, nitrogen, electrical box, more controls, bed temp controller, uses inert gases, for tempering, marquenching & stress relieving, manuals, vertical lift cover on swing arm, 11/1982* (MN)
    2050 F furnace, fluidized bed: Procedyne QB2032 (quench bath), model HT-2050A-1424, 14" diameter x 24" deep  pit (retort), fluidized gas (compressed air or nitrogen), powered cover, 48 KW, 55 amp, 460/3/60, gas gauges, ammonia, methane, Honeywell DCP700 controls, chart recorder, excellent condition, control, atmosphere as currently stored, cycle timer, vertical lift cover, vary cfm of fluidized gas and air in retort to control temperature, 11/1982* (MN)
       750 F furnace, salt bath: Ajax IQC-3020, 10 KW, 18" x 22" opening, 450F - 750F, uses Nitrate salt, with 1/4 hp Lightnin mixer, quench for parts coming out of furnace, electrodes (immersion heaters), 10 KW, 440 volt, 1958* (MN)
         5 hp granulator, plastic: Nelmor G810P1, 8" x 10" feed throat, 3 rotary knives, 2 bed knives, 1995* (MN)
   7-1/2 hp granulator, plastic: Polymer 912-SP, 9" x 12" feed throat, 2 rotary knives, 2 bed knives, 230/460/3/60 electrics, s/n - 74277* (MN)
         3.5" grinder, centerless: Cincinnati #2EA, 8" wheels, hydraulic grinding wheel dresser, through feed rest, 1942* (MN) 
    5" x 12" grinder, cylindrical: Myford MG12, hand feed, 10" grinding wheel, 2 hp wheel head, 100-900 rpm, 3/4" maximum collet size, tailstock, 1974* (MN)
  10" x 18" grinder, cylindrical: Jones & Lamson Format 15/450, Allen Bradley 8600 cnc control, 18" grinding wheel, 5 hp motor, inch/metric, 1.5 hp workhead, excellent, 1995* (IL)
  10" x 20" grinder, cylindrical: Brown & Sharpe #1 universal, swing-down internal attachment, magnetic & 3-jaw chucks, temporary specs, 1959* (MN)
  10" x 20" grinder, cylindrical: Landis 1R universal, motorized workhead, lots of tooling, 1972, POR* (IL)
      3.125" grinder, drill: Brierley ZB80, semi-automatic, .197" - 3.125" capacity, 40-180 degree point angles, 2-3-4 flutes, powered work-head and cross-slide, point splitting attachment, coolant, 1990* (MN)
31.5" x 157" grinder, roll: Waldrich Siegen Ingersoll WSIIIa80/6, camber - convex/concave, gears, 50" actual swing, 164" centers, 12,000# roll weight w/o supports, 9 - 72 rpm faceplate, 27.5" x 2.75" grinding wheel, 3 work rests, 3 (Yaskawa GPD 515/G5, Yaskawa GPD 515/G5, Magnetech GPD 515) variable frequency drives & motors added in 2005, rescraped ways in 1997, 28' x 10' x 7' H + motor, 19' x 2' x 6-1/2' electrical control box, Encyclon filter, controls, 1964* (MN)
          20" grinder, snag: U.S. Electrical Tool 62VSA, double end, variable speed, dual 7-1/2 hp motors, 208/230/460/3/60, 1750 rpm,  adjustable rests, 20" x 2" x 10" wheels, grinding wheels (Radiac Abrasives C202P 2340 rpm), 460/3/60* (MN)(3)
    6" x 18" surface: Harig 618 "Carbide Hogger", manual/hydraulic, 1/1 hp, 560/3500 rpm spindle, fine feeds (vertical & cross), 6" x 12" magnetic chuck, 1978* (MN)
    6" x 18" surface: Harig Super 618 manual, 6" x 18" chuck, coolant, 1975* (MN)
    6" x 18" grinder, surface: K.O. Lee S718, manual, coolant, 6" x 18" magnetic chuck, 1976* (MN)
    8" x 24" grinder, surface: DoAll D824-12, hydraulic, 12" grinding wheel, 8" x 24" chuck, power downfeed, 5 hp grinding spindle motor, coolant, cleaned & painted, controls, 80" x 60" x 75" high, 1980* (MN)
        2 ton hoist, cable: R&M DB-2-24 electric, plain trolley, 2 hp hoist motor, 460/3/60, before removal, 20' & 23' wall mounted jib arms, 460/3/60* (MN)(5)*
        2 ton hoist, chain: Coffing ECMT-4024, powered trolley, 15' lift, pendant & radio control* (MN)(3)
        2 ton  hoist, chain: Wright-Way electric cable, product 2215041, 20' lift, power trolley, 8 fpm lift speed, pendant, 230/460/3/60,  unused in original box, 1993* (MN)
      5 ton hoist, chain: Detroit M10XL electric cable, underslung power trolley for double girder bridge, magnetic brake, 20' lift, 2 speed, very slight use, 1985, 2,650.00* (MN) 
        3.75" hone: Sunnen MBB-1690, power stroker (80-310 spm), .062"-3.75" diameter, 200-2500 rpm, 1/2 hp, some tooling, 1978* (MN)
        3.75" hone, horizontal: Sunnen MBB-1800, "power stroker", .060" - 3.75" capacity, 20 - 2500 rpm spindle speeds, 80/110/160/220/310 spm stroking rates, 1 hp spindle motor, 1/2 hp stroke motor, cabinet full of tooling, s/n - 73164* (MN)
   10" x 12" hot plate welder: Branson HV12, 12" x 15" aluminum heat platen, 10" X 12" part size, pnuematic operation, 10" between (14" x 17") press platens, 10" press platen stroke (each), 14" in/out heat platen stroke, 4" left/right heat platen stroke, Allen Bradley SLC500 PLC, Total Control Quickpanel Jr touch screen, 480/3/60, enclosure, 66" x 52" x 79" overall dimensions, 1800# weight, 2001* (MN)
   10" x 12" hot plate welder: Branson HV12, 12" x 15" aluminum heat platen, 10" X 12" part size, pnuematic operation, 10" between (14" x 17") press platens, 10" press platen stroke (each), 14" in/out heat platen stroke, 4" left/right heat platen stroke, Allen Bradley SLC500 PLC, Total Control Quickpanel Jr touch screen, 480/3/60, enclosure, 66" x 52" x 79" overall dimensions, 1800# weight, 2001* (MN)
   10" x 12" hot plate welder: Branson HV12, 12" x 15" aluminum heat platen, 10" X 12" part size, pnuematic operation, 10" between (14" x 17") press platens, 10" press platen stroke (each), 14" in/out heat platen stroke, 4" left/right heat platen stroke, Allen Bradley SLC500 PLC, Total Control Quickpanel Jr touch screen, 480/3/60, 66" x 52" x 79" overall dimensions, 1800# weight, 2001* (MN)
   10" x 12" hot plate welder: Branson HV12, 12" x 15" aluminum heat platen, 10" X 12" part size, 10" between platens, 10" press platen stroke (each), 14" in/out heat platen stroke, 4" left/right heat platen stroke, Allen Bradley SLC500 PLC, Total Control Quickpanel Jr touch screen: startup screen, weld setpoints/last weld screen, tooling screen, ready to cycle screen,  480/3/60, plexiglass enclosure, 66" x 52" x 79" dimensions, pnuematics, 1800# weight, 2001* (MN)
        6 ton insertion machine: Haeger HP6-C-2, hydraulic, 18" throat, foot pedal, AF-MAS automatic bowl feeder with vacuum generator & counter, work light, foot controls, 1985* (MN)(2)
        6 ton insertion machine: Haeger 618, hydraulic, 18" throat, 0"-8" stroke, 1200 insertions/hour, 1999 & 2001* (MN)(2)
          28" lapper: Engis Hyprez 28LM460VP production lapper, 0-100 rpm, (3) conditioning rings, diamond compound dispenser, 3 hp, 1991* (MN)
          28" lapper: Engis Hyprez 28LM460VP, 0-100 rpm (variable), (3) 12"/13.87" conditioning rings, independent pressure regulators, 35" work height, MiniMizer lapping dispenser, pump, auto lubrication, 3 hp, 460/3/60, 1993* (MN)
          48" lapper: Peter Wolters AC-1200, double sided, swing away upper wheel, 2-5/8" thick cast iron lap plates, 7.5 kw drives, (5) 18.62" pin driven carriers (carriers unavailable), outer pin ring, automatic sizing, swing away dresser, Siemens S5 PLC, polishing software, control pendant, BGK chiller, 10,764 hours use, 480/3/60, 52.3 amps, 6800 kg weight, used 1-1/2 years to polish (fine grind) silicon wafers (aluminum/titanium) with gum rubber diamond slurry, 1993*(MN)
  11" x 18" lathe, precision: Hardinge HLV-H, 125 - 3000 rpm, threading, Sony 2-axis DRO, 3-jaw & 4-jaw chucks, 5C collets, power carriage feed, tooling, Aloris tool post, 1.5 hp, 230/460/3/60, coolant, very tight,  HLV-H-6121M* (MN)
  10" x 20" lathe, engine: Monarch EE precision toolmakers lathe, inch/metric threading, taper attachment (ball bearing), 13-1/2" actual swing, 40-4000 rpm spindle speeds, tube type drive, extra tube, 5 hp motor, 1-3/8" spindle hole, D-1 camlock spindle nose, (2) 4-jaw chucks, faceplate, 3-jaw chuck, steady rest, worklight, inch/metric handwheels, headstock feed gears, chip guard, 460/3/60, 3450# weight, 1982* (MN)
  12" x 36" lathe, engine: Clausing 5916, 52-2000 rpm (variable speed), belt drive, taper attachment, collet closer, toolpost, 6-jaw chuck (no jaws), faceplate, turret stop, worklight, s/n - 508610* (MN)
  14" x 48" lathe, engine: South Bend model CL185D, belt drive, 3 jaw chuck* 
  15" x 54" lathe, engine: LeBlond Regal, 30-1200 rpm, servo shift, inch/metric, taper, chucks, 1981* (MN)
 16" x 78" lathe, engine: Monarch, Series 60, 18-1/2" actual swing, geared head, 800 rpm, taper attachment, Accurite III 2-axis digital readout, government stored, excellent, steady rest, Cushman 12" 3-jaw chuck, 1954* (MN)
   20" x 80" lathe, engine: DoAll Romi 20H, 4-1/8" hole, 45-1700 rpm, inch/metric, hard ways, taper, steady,  excellent, light use, tight screws, quiet head, 15 hp, 1987*
  24"x135" lathe, engine: Dainichi DH-135, 35" swing in gap, 16-1200 rpm, , inch/metric threading, 3-jaw & 4-jaw chucks, 2-1/4" spindle hole, coolant & chip pans, 1967 (MN)
 26" x 144" lathe, engine: LeBlond Makino Regal Servoshift, 20-1600 rpm, inch/metric threading, 3" spindle hole, no taper, 3-jaw chuck, L2 spindle nose, toolpost, worklight, coolant & removable chip pans, 30/15 hp motor, 460/3/60, 200" overall length, 9200#, 1984* (IL)
36.5" x 240" lathe, engine: LeBlond 3220-25 Heavy Duty, (36) speeds, 10 - 1300 rpm (lever shift), 25" swing over cross slide, carriage rapid traverse, taper attachment, 3-jaw & 4-jaw chucks, steady rest, chip pans, coolant, 40 hp spindle motor, 208/416/3/60, 2700 hrs use in maintenance facility, tailstock, 1971* (IL)
    9" x 18" lathe, second operation: Hardinge DV-59 second operation, lever cross-slide, lever turret, 1961* (IL)
 17" x 55" lathe, wood: Oliver 2255, (16) spindle speeds, 90-2600 rpm, 2 hp Lima drive, 230/460/3/60* (MN)
       6 ton marking: Schmidt #175-6 hydraulic, 7" roll travel, 25" die space, 12" riser, 18" between housings, 3 hp, 220/440/3/60, rotary fixture, palm buttons, 1956* (MN)
40-2000X microscope: Zeiss Axioskop 50, 10X & 20X eyepiece magnification, 4X, 10X, 40X & 100X objectives, stereo/binocular, light source, Bausch & Lomb camera (3X, 5X, 7.5X 10X), s/n - 451485, base, extra base* (MN)
microscope, toolmakers: Optometrics, micrometer adjustable stage, vertical adjustment, illumination, (4) with 2-axis digital readout, (1) without readout* (MN)
 12" x 53" mill, horizontal: Cincinnati 207MK, telescoping quill, rear controls, 7-1/2 hp, 1976* (MN)
  141 cu in mill, laboratory: Thomas-Wiley model 4, 7-3/4" diameter milling chamber, 2-1/4" diameter sample input, 50 to 1000 grain sample volume, 800 rpm @ 60 Hz or 667 rpm @ 50 Hz, 4 adjustable rotary knives, 6 adjustable  bed knives, hinged steel door* (MN)
    4" x 12" mill, production: Barker PM hand, 5" x 3" x 3" travels, 1/2" through collet tube, 1/3 hp, 115/1/60, 19xx* (MN)
   8"x6"x7" mill, vertical: DynaMyte 2800 bench mill, 3-axis cnc, Dyna 2800 control, 8000 rpm, 16" x 6" table, 200# capacity, toolholders, RS232 port, one shot lube* (MN)
    9" x 36" mill, vertical: Bridgeport Series I, vertical, 1-1/2 hp (needs bearings), 60-4200 rpm, Accurite II dro (missing scale) , x & z power feeds, power draw bar,  ways, newer head, 1971* (MN)
    9" x 42" mill, vertical: Bridgeport, 1-1/2 hp variable speed, 6" vise, 1972* 
    9" x 42" mill, vertical: Bridgeport, 1-1/2 hp variable speed head, x & y digital readout scales (no readout), power feed (missing pf controller), 1974* (MN)
    9" x 42" mill, vertical: Bridgeport, 1-1/2 hp variable speed head, x & y ballscrews (cnc reconversion), R8 spindle nose, 480/3/60, with Everede heady, 1974* (MN)
    9" x 42" mill, vertical: Bridgeport Series I, vertical, 1-1/2 hp, 60-4200 rpm, Accurite III dro w/one scale, x & z power feeds, chrome ways, power draw bar, 1979* (MN)
    9" x 42" mill, vertical: Bridgeport Series I, 2 hp, variable speed, power feed, 2-axis dro, 1987* (MN)
    9" x 42" mill, vertical: Bridgeport Series I, 2 hp, 60-4200 rpm, chrome ways, Accurite III 2-axis dro, power feed, Kurt power draw bar, worklight, one shot lube, 1988* (MN)
    9" x 42" mill, vertical: Bridgeport Series I, 2 hp variable speed head, power feed, Quality 500 2-axis digital readout, Quality 500 scales, painted, new R8 spindle with bearings, 1992* (MN)
    9" x 42" mill, vertical: Bridgeport Series I, 2 hp variable speed, chrome ways, power feed, Futuba Pulscale 2-axis digital readout, 200-480/3/60, R8 spindle nose, 480/4/60, 1994* (MN)
    9" x 48" mill, vertical: Bridgeport EZ-Trak Plus CNC, vertical, 2 hp, 60-4200 rpm, new spindle bearings, Bijur auto lube, Kurt power draw bar, worklight, chrome ways, one shot lube, EZ Trak control, vise, 1992* (MN)
  11" x 58" mill, vertical: Bridgeport Series II, vertical, 4 hp, 50-3500 rpm, 30" x, 15" x & 16" z travels, 3-axis power feeds, chrome ways, Accurite 3-axis 3X/D200 digital readout, #40 spindle taper, Bijur one shot lube, Bijur ULA spraymist coolant, pump & reservoir, tool holders, 230/460/3/60, tight machine (.017" play on x, .005" play on y & z), 1990* (MN)
       3/16" nibbler: Trumpf CN-500 copy nibbler, 54" throat, sliding x-rail with clamps, tooling, 550/3/60, more tooling, 20 mm x 24 mm tool shank, 198x*
        1/4" notcher: Profab (Roper Whitney), corner radius machine, model 900, 13" serrated blade with 11 radiuses, electrics, 1984* (MN)
        350F oven, batch: Precision Quincy 40A-350, electric, 36" x 36" x 36", double doors, recirculation, purge, forced exhaust, control, 208/3/60, 73.9 amp, 48" x 57" x 84" high (shipping), 1985* (MN)
       400 F oven, batch: Thermatronix 96" x 36" x 48" deep, 36 kw electric, recirculation, dial temp control, 122,800 btu, 50 amp, 460/3/60, with fixture to rotate filament windings* (MN)
       400 F oven, batch: Despatch V-35, 16 KW electric, 48"W x 30"D x 42"H, 3 shelves, recirculation, digital temperature control, 6-1/2' x 3' x 7' high overall, 480/3/60, 19.3 amp* (MN)
       500 F oven, batch: Despatch V-29, 12 KW electric, 37"W x 25"D x 37"H, aluminum interior, 3 shelves, double door, recirculation, timer, Partlow temperature control & high limit, 480/3/60* (MN)
       500 F oven, batch: Despatch V-35, 16 KW electric, 48"W x 30"D x 42"H, 3 shelves, recirculation, windows, LFE digitial temperature control, 6-1/2' x 3' x 7' high overall, 208/3/60, 44.5 amp* (MN)
        500F oven, batch: Despatch V-35, 16 KW electric, 48"W x 30"D x 42"H, recirculation, Partlow control, 550/3/60, 16.8 amp, 84" x 40" x 76" high (shipping)* (MN)
       600 F oven, batch: Blue M POM-246G, 316C/600F operating temperature, 36" W x 24" D x 48" H, single door, 8 shelves, 316C/600F operating temperature, 11 KW electric, 316 C, 440/3/60, 1 hp recirculation, Omega digital temp indicator, Partlow temperature control, Blue M memory ring control, pricing* (MN)
        600F oven, batch: Blue M POM-246FX, 36"W x 24"D x 48"H, electric, 240/3/60, Power-O-Matic temperature & overtemperature controls, forced exhaust, shelf brackets, 60" x 50" x 92" high (shipping)* (MN)
       650 F oven, batch: Blue M POM-1406B-1, electric, 48"W x 36"H x 24"D, double doors, recirculation, 460/3/60, 46 amp, polished aluminum interior, controls* (MN)
       650 F oven, batch: Blue M POM-1506G-1XX, electric, 36"W x 30"H x 24"D, double doors with windows, 3/4 hp recirculation, polished aluminum interior, controls, 480/3/60* (MN)
       662 F oven, batch: Blue M STL-05-C-MP350 stacked oven, double door, electric, 25" x 20" x 20" high, 5.8 cubic foot (each), stainless interior, horizontal airflow, chart recorders & controls, 240/1/60, 6 KW* (MN)
        850F oven, batch: Despatch CF-32, gas fired, 37"W x 25"D x 37"H, double doors, shelves, recirculation, dataplate, 220/3/60 electrics, Eclipse burner valve, extra valve picture, 96" x 40" x 69" high, 80" with exhaust* (MN)
       850 F oven, batch: Despatch V-35SD, electric, 42 KW, 48"W x 42"H x 30"D, aluminum interior, double doors, forced exhaust, recirculation, 6 shelves, 240/3/60* (MN)
       850 F oven, batch: Grieve HC-850G, gas fired, 50" x 50" x 50" interior, forced exhaust, recirculation, double door, controls, chart recorder, 1964* (MN)
       800 F oven, burn-off: Controlled Pyrolysis PTR-260, 60"W x 72"D x 72"H, 350,000 btu primary gas burner, Pollution control secondary burners to 1400F, water spray system, Honeywell controls, floor/cart, 1991* (MN)
        400F oven, infrared: BGK "flatline" curing system, 24" wide metal mesh conveyor, 17' oven length, six heat zones (sides & top), 1-1/2 hp blowers, 1/15 hp forced exhausters, 81.1 KW, 107 amp, 480/3/60, controls, 400F @ 3.5'/minute speed, product detect photo eye (idles heaters when belt empty), 3' heat section, 6' cool down, 3' entry, 3' exit, 2' transitions, excellent, 175" x 44" x 84" high, 1997* (MN)
  oven, reflow: BTU Paragon 150, right to left, 10 upper & 10 lower heat zones, edge chain conveyor, mesh belt, fixed rail on front, 1997* (PA)
       300 F oven, vacuum: T-M Vacuum Products PC36-6, 36" x 36" x 36" chamber, 27 cubic foot, 10-20 micron vacuum, stirring fan, automatic w/gas backfill, sight glass, digital controllers, 1997* (MN)
       350 F oven, vacuum: T-M Vacuum Products PC-36-2, 27 cu foot, 36" x 36" x 36" chamber, Alcatel 2033 rotary vane vacuum pump, 27.5 cfm, produces 1 torr (10 - 20 micron) vacuum, Copeland air cooled compressor, 917 Pirani & 0-30 Hg vacuum gauges, automatic gas w/backfill, missing stirring fan, electrical cabinet, viewing window, electrical cabinet, temperature controls, silicon heat elements, 460/3/60, 1996* (MN)
       450 F oven, walk-in: Precision Quincy EC-506-6, 60"W x 72"H x 72"D, 350,000 btu, gas fired, single end, excellent, 1986* (MN)
       500 F oven, walk-in: Grieve TBH-500, 24 KW electric, 48"W x 48"D x 64"H, double doors, new heating elements, floor, controls, 6' x 6' x 6' overall* (MN)
       500F oven, walk-in: Despatch PSC3-26R-G, propane, 54"W x 76"H x 8'10"D, single end, double door, floor, rear mounted heater box, digital temperature & overtemp controls, recirculation, 208/240/480/3/60, 5 hp   forced exhaust, 1994
       500 F oven, walk-in: Despatch PWC3-14-1-G, double end, gas (burners) fired, 54"W x 68"D x 66"H, double  door, floor, controls, 4" wall insulation, top mounted heater box, 1985* (MN)
       500 F oven, walk-in: Grieve TBH-500, gas (burners) fired, 36"W x 48"D x 60"H, floor w/cart tracks, forced exhaust, recirculation, purge, control* (MN)
       550 F oven, walk-in: Despatch S-250, gas fired, 84" x 84" x 150"D, single end, top mounted heater box, Partlow temperature control, forced exhaust, 3 hp recirculation fan, 220/3/60, DG350 350,000 btu burner,  update 1994, currently dismantled and palletized for shipping, 1962* (MN)
         650F oven, walk-in: Despatch RS-4-HD, gas fired, 56"W x 72"D x 72"H, single end, double doors, digital temperature control, chart recorder, 96" x 83" x 89" H, 65" x 48" x 52" high rear mounted heater box, 74" x 36" x 18" control stand* (MN)
       650 F oven, walk-in: Precision Quincy 102-650T, 250 KW electric, 6' LR x 10' FB x 6' H, single end, double doors, recirculation, forced exhaust, digital controls, chart recorder, vertical/horizontal airflow, 58" height above 5'6" x 9'6" powered cart, floor, 8'6" LR x 11' FB x 12' H overall, top mounted heater box, 340 amp, 1990*
packaging: Accucount 10, controls, 117/1/60,  (2)* (MN)
packaging: Accucount 15 parts counter, controls, extra picture, extra picture* (MN)
  pad printer: Tampo Print Hermetic 90, 10 mm x 80 mm stamp, rotary table, 1999* (MN)
    100 cfm plastic, drier: Dri-Air ARID-X dessicant drier, dual hopper, quick changeover, digital controls, 1995 (MN)
     27 mm plastic, extruder: Leistritz MIC27/GL-320 twin screw laboratory extruder, maximum 500 rpm, 12 KW drive, extra screws, 53 hours use, 1995* (MN)
      1-1/2" plastic, extruder: Killion KN-150, 24:1 L/D ratio, 45#/hour, DC drive, 7 heat zones, 12" film blowing die, rewind, 300  hours use, 1993* (MN)
  7-1/2 hp plastic, granulator: Nelmor G1012P1, 10" x 12" cutting chamber, 3 rotary knives, 2 bed knives, top loading, 230/460/3/60, currently wired 460 volt, 1995* (MN)
     10 ton plastic, injection molder: Autojectors VS10-S, 10 Series insert molder, .98 ounce, 3/4" vertical screw injection (7" stroke) & clamping (7" stroke), 20:1 L/D, C frame, 8" x 14.5" upper platen, 6" x 8" lower platen, 6" x 39" shuttle table, 16" shuttle table stroke, INX6000 Total Touch control, Allen Bradley PLC5 with battery chip, 230/3/60, rear, 4 KW heater (7 zone) , 15 hp hydraulics, Dri-Air drier, 1996* (MN)
     35 ton plastic, injection molder: Autojectors WDHS-35-S, vertical insert molder, 4.9 ounce shot size, 16" side to side shuttle table, 8" x 10" mold base, 7-1/2 hp hydraulic pump, variable volume pump control, digital controls,, electrics, new 1995* (MN)
     70 ton plastic, injection molder: Autojectors HS-70-S, vertical clamp, 6.9 ounce horizontal shot, 1-3/4"" barrel screw, oversize shuttle table, Siemens TI-545 PLC & TCAM interface, 8' x 8' x 8'H, 10,000#, 1992* (MN)
     88 ton plastic, injection molder: Battenfeld BA800/315 CDC, 25" x 25" platens, 16.5" x 16.5" btb, 7 ounce shot size, 16.73" stroke, 24.61" daylight, Unilog 4000B controller, core pull, hydraulic knockouts, 1995* (MN)
      2.2 lb plastic, sprue picker: Conair-Harmo FX-150, fits 60-150 ton injection molder, 21.7" arm stroke, 140 degree swing angle, 50 to -90 degree swing angle, controller, 2000* (NJ)(11)
      4.4 lb plastic, sprue picker: Conair-Harmo FX-250, fits 150-250 ton injection molder, 25.6" arm stroke, 3.7" - 19.5" strip kick stroke, 4.4# payload w/o wrist rotation, 2.2# payload w/wrist rotation, 3.8 second minimum cycle time, 2000* (MN)(3)
           8" polisher: Buehler Ecomet III grinder/polisher, 50 - 50 rpm, gear drive, swing-spout water faucet, catalogue no. 49-1650-160, 115/1/60, s/n - 338-ECH-2062* (MN)
      15 ton press, die cutting: Preco 1212C, hydraulic, C frame, 0"-4" stroke, micrometer adjustment, 12" x 12" bolster, 230/3/60, Series 104 control, aftermarket feeder, 2000* (MN)
     25 ton press, die cutting (clicker): Herman Schwabe D swing-arm die cutter, hydraulic, 1/2" - 2-1/2" stroke, 9" daylight, 23" x 24" upper platen, 13" x 30" lower bed w/24" x 40" bolster plate, adjustable daylight & stroke (manual), starter switch, palm buttons, 1980* (MN)
      40 ton press, die cutting: Preco 1320-L, 4-post, hydraulic, 13" x 20" cutting area, 2" stroke, micrometer adjustment, dual drive, front & rear roll feeds, SBCIII control, jog/speed/direction, hydraulic, light curtains, die clamps, electrical cabinet, 21334 hours, 460/3/60, 1995* (MN)
      30 ton press, die cutting: Samco GTH, model TH-35 2075, travelling head, joystick controller, 6" stroke, 1" - 7" daylight, 30" x 30" cutting platen, 30" x 79" between uprights, 65" ram travel (left/right), hydraulic, 3.2 hp (230/460/3/60), 64 litres Mobil DTE 26, 460/3/60, 2200 kg, 29-1/2" x 74" platens, pump motor, 1996* (MN)
     30 ton press, high speed: Minster TR2-30 Pulsar SSDC press, 100-1400 strokes per minute, 1" stroke, 11.375" - 13.125" shut height (adjustable), 1.75" motorized adjustment, 30" x 21" bolster, air clutch, remote console, Vamco feed, auto lubrication, sound enclosure, 1982* (IL)
     60 ton press, high speed: Bruderer 50/60 precision, high speed, 4 post, 5/8" - 2" stroke, 100 - 1200 strokes per minute, 29.92" x 25.59" bolster, 30" x 16.54" ram, 30.3" tool opening, 25 KW drive, 460/3/60 electrics, BBV 202/120 feed, remote console, 1997 - new bolster & rebuilt clutch, brake & flywheel, 2000 - motor rebuilt & hydrostatic drive rebuilt by Bruderer, sound enclosure, excellent maintenance records, 1981* (MN)
     60 ton press, high speed: Bruderer BSTA60II HL precision, 4 post, long bed, 5/8" - 2" stroke, 100 - 1120 strokes per minute, 36.5" x 25.59" bolster, 36.5" x 16.54" ram, 37.2" tool opening, 8.36" - 11.57" shut height, 25 KW, hydrostatic drive, 460/3/60 electrics, BBV202/120 feed, remote console, 124" x 96" x 136" high, sound enclosure. 1984* (MN)
       4 ton press, hydraulic: Denison TO45H, 12" stroke, 18" daylight, inching, palms, C204 full safety valve, missing anti-repeat board, full cycle, heater controls, 5 hp, 220/3/60* (MN)
     10 ton press, hydraulic: Eitel RP-10 straightening press, 5" stroke, 8" x 51" table, rolling fixture with roller style work supports, lever operated ram, adjustable ram speed, motor, hydraulic, 230/3/60, 1970* (MN)
     18 ton press, hydraulic: Neff D15-5M, 7" stroke, 18" daylight, 9" throat, 12" x 15" bolster, factory bench, palms, ram speeds: 153/60/98 inches per minute, 9-36 strokes per minute, 1999* (MN)
     75 ton press, hydraulic: K.R. Wilson 37FX, H-frame shop press, s/n - 2705,
     10 ton press, mechanical: Whitney Jensen #130, 18" throat, 12" x 18" bed, 1-1/4" stroke, 1-3/4" adj. , 7" die space, $750.00* (MN)
     22 ton press, mechanical: Minster #3 OBI, 4" stroke, 8.75" shut height, 12" x 20" bolster, 115 strokes per minute, air clutch & brake, 1965* (CA)
     35 ton press, mechanical: South Bend/Johnson 35-FW-AC OBI, 2-1/2" stroke, 11" shut height, 100-200 spm, 24" x 15" bolster, CWP roll feed, air clutch, palms, excellent, 1979* (MN)
     45 ton press, mechanical: Komatsu OBS 45-3 OBG, 3.94" stroke, 9.84" shut height, 2.36" ram adjustment, 50-100 spm, 31.5" x 17.7" x 4.33" bolster, controls, 15.7"  x 13.8" ram, hydraulic overloads, air clutch & brake, palm buttons, crank angle detector,  solid state controls, isolation pads, 230/3/60, Hitachi AC inverter, transformer, excellent, 1987* (MN)
     60 ton press, mechanical: Rousselle #6A OBI, 3" stroke, 12-1/2" sh, 50 spm, air clutch & brake, air cush, palms, 1981* (IL)
     10 ton press, straightening: Eitel RP-10 straightening press, 5" stroke, 8" x 51" table, rolling fixture with roller style work supports, lever operated ram, adjustable ram speed, motor, hydraulic, 230/3/60, 1970* (MN)
    200 ton press, mechanical: Niagara SC2-200-7242, straight side, double crank, 12" stroke, 32" shut height, 72" x 42" bolster, 30 strokes per minute, 21" x 20" windows, (2) air cushions, air clutch & brake, clean & quiet, 1973* (IN)
      50 ton punch, fabricating: Whitney 652-50, 30" throat, 30" x 72" working surface, duplicator, 20 hp hydraulic drive, air over hydraulic punch clamp, quantity of tooling, 1973* (MN)
      15 ton punch, turret: Rotex 18C, 18 station, 18' throat, 2-1/4" punch capacity, factory stand, 1970* (MN)
     15 ton punch, turret: Rotex 18C-2.25, 26" throat, 18 station, 2-1/4" largest punch, full set of punches, many punches unused, more punches, factory stand, work light, 825# weight, will punch center of 52" sheet, s/n - 32939, 1988* (MN)
riveter: VSI Automation TM6 Spinomatic, rotary table, temporary specifications, s/n - 23583* (MN)
        .25" riveter: Baltec RN-180, 3/4 hp, timer, controller* (MN)
         .50" riveter: Baltec RN-280, timer, controller, 1 hp, 460/3/60, temporary specifications* (MN)
       .125" riveter: National 2400B, dual head, 8" throat, 0"-8" adjustable centers, 1/2 hp* (MN)(2)
      .186" riveter: National 1600F, pnuematic, 14" throat, offset for hard to reach spots, rotary hopper, 50 cycles/minute, .085" x 1/8" minimum rivet, .186" x 3/4" max rivet, 3" stroke, tooled for 7/16" & 9/16" rivets with .334" body, Protectomatic & Touchomatic safety controls, foot pedal, 825# weight. 1993* (MN)(3)
         .25" riveter: VSI Automation TM10 Spinnomatic, .02" minimum, 6-station rotary table, .5 to 15 second cycle time, 3/4 hp, 1974, 208/220/440/3/60, rear view, currently wired 440 volt, controls* (MN)
 14 gauge rollformer: Lockformer 14 gauge Pittsburgh Lock, 7 forming stations, auxilliary 3 in 1 combination rolls, 1999* (MN)
 16 gauge roll former: Flagler "heavy duty" Pittsburgh machine, 7 stand, Pittsburgh & drive cleat rolls, 30 feet per minute, 2 hp, 208/220/440/3/60, being painted* (MN)
 20 gauge rollformer: Engel 835, 8-station, 1.5" shafts, 5" between rolls, 3" vertical roll height, 2 sets of interior rolls, government lock rolls are standard, 5 hp, 198x (MN)
 20 gauge rollformer: Lockformer 8900 Cleatformer, 9-station, 100 fpm, temporary specifications, 1969* (MN)
3"x3"x3/8" rolls, angle: SMT Pullmax Z31, horizontal/vertical, 3 roll drive, 9-13/16" diameter rolls, 26 fpm, 36" minimum leg out diameter, 2-1/2" x 2-1/2" x 3/8" leg in - 48" minimum diameter, 6.6 hp rotation motor, 2.4 hp hydraulic pump motor, guide rolls (manual adjustment)* MN*
 12 gauge rolls, plate: Niagara #351, 4' x 12 gauge capacity, manual, drop end* (MN)
 10 gauge rolls, plate: Hendley & Whittemore 3F, 7' x 10 gauge capacity, initial pinch, angle rolling attachment* (MN)
          25" sander, belt: Ramco 25T75, single, vertical head , 24" x 75" belt, 10 hp main motor, 20-80 fpm, 1 hp feed motor, belt cleaning brush, (2) AAF dust collectors & filter, good contact rolls, 1987, 230/3/60* (MN)
          15" sander, disc: State, 1 hp, 220/440/3/60, 22" x 9" tilting table, start/stop switch* (MN)
    9" x 11" saw, band, horizontal: DoAll C-4, 1" blade, spring loaded head, 1965* (MN)
  10" x 12" saw, band, horizontal: DoAll C-260A-2, 1-1/4" blade, 0"-24" auto feed w/multiple indexing, 20-350 fmp blade speed, bundling attachment, 1991* (MN)
  12" x 12" saw, band, horizontal: DoAll C-305A, 1-1/4" blade, 0"-16" auto feed w/multiple indexing, 20-350 fpm, 5 hp, 1997* (MN)
  18" x 22" saw, band, vertical: Marvel 8/M8, 45 degree manual tilt frame, 18" x 22-1/2" maximum capacity,  18" x 14" capacity @ 45 degrees, 3/4" blade, 1.3 hp motor, 3 speed ranges, 20-200 FPM, vise, 575/3/60, 1978* (MN)
          30" saw, band, vertical: DoAll 30-M, has blade guard for 16" throat using 2 wheels, 64" x 44" x 75" high (on skid), blade welder/grinder, 1959* (MN)
          36" saw, band, vertical: DoAll 36R Zephyr, 20" under blade guides, lower 10 hp drive motor, 0 - 10,000 fpm blade speeds, cover open, 1957, rear view, extra drive belts* (MN)
          36" saw, band, vertical: Doall ZW-3620, 20" under blade guides, 0-15,000 fpm blade speeds, 15 hp, tilt table, tension indicator, extra blades, heavy duty blade guides, exc condition, new 1960* (MN)
          36" saw, vertical: Grob 6V-36, 25-15,000 fpm blade speeds, 36" x 36" tilting table, 20" work height, air/hydraulic table feed, blade welder & grinder, 15 hp brakemotor, 230/460/3/60, 1991* (MN)
          50" scrubber & sweeper: Advance 5015 Hydro-Cat, riding type, 50" scrubbing width, (4) 13" scrub brushes, sweeping brush, 66" turning radius, 4 cylinder engine, propane, 0-8 mph, 60 gallon solution tank, 50 gallon recovery tank, 84,000 square feet/hour, 352 hours use, , 1996* (MN)
  16 gauge shear, power: Wysong, model H-52, hydraulic, 16 gauge, front supports, foot pedal control, covers, s/n - H32470, quiet pump* (MN)
          52" shear, power: Famco, model 1252, mechanical, inch/single/continuous, 12 gauge, front supports, foot actuator, 5 hp, 230/460/3/60, 1975* (MN)
  10 gauge shear, power: Pexto 10-U-6A, mechanical, 6' squaring arm, front supports, 1970* (MN)
  10 gauge shear, power: Pexto 10-U-6B, mechanical, 6' squaring arm, supports, 24" rear operated back gauge, 1970* (MN)
  10 gauge shear, power: Pexto 10-U-8, mechanical, 6' sauaring arm, 24" front operated back gauge, extra blades, 1960* (IL)
spin welder: Vercon Autoweld AW-1, up to 8" part height, up to 6" diameter, friction welds halves of plastic parts, adjustable upper jaw, fixed lower jaw, 1-1/2 hp variable speed drive, 230/460/3/60 electrics, 7 station timer, 48" x 48" x 100" high* (MN)
        22" slitter: Dahlstrom with rewinder, 2-1/4" shaft diameter, with tooling, 19xx* (MN)
  .188" - 3" swager: Sierracin Harrison 8777-7 "torque plus" (internal & external) roller swager, dual head (small: .188" - 1.250"/large: 1.250" - 3"), 3-groove, automatic, calibration kit, makes aircraft high pressure (5000 psi) hydraulic fittings with titanium, electronics, torque or diameter control, touch screen, Sierracin tooling for Boeing 7D0028 unions & 7D0030 sleeves, 480/3/60, 2000* (MN)
     45 KVA transformer: Square D 45T6H, three phase, 480 volt primary, 240 volt secondary, rainshield* (MN)
   39,500# truck, platform lift: GMC 7000 medium duty, 7'4" x 14' scissors-lift  bed, 17,975 miles, 1985* (MN)
      1-1/2" tube bender: Diacro 8, hydraulic, 1" solid, 1-1/2" tube (16 ga wall), 24" maximum radius, 3500# torque with 4" cylinder, 3 hp, 208-220/3/60, 1150# weight, Control-A-Bend, s/n - 1-1071* (MN)
tube bending dies: (18) Pines pin type rotary draw dies, inserted die (bolt on clamp), left hand only* (MN)
             3" tube endformer: Eagle Precision I/O, horizontal, single ram, dual (inner/outer) hydraulic cylinder, manual adjustment, AEG Modicon M984 PLC, shuttle table, 10 hp pump, 480/3/60, control, water cooled, uses serrated tooling (automatic lubrication), s/n - 2658* (MN)
 1-3/4" - 3" tube endformer tooling: Eagle Precision I/O, inner segmented expanding fingers & outer reducing jaws, lubricated barrel, back plate, separator plate, mandrels, lifting handle, 67 assemblies, extra  & (61) incomplete* (MN)
     20 kHz ultrasonic booster: Branson 900 series,  gold aluminum, 1.5:1 gain, excellent condition* (MN)
     20 kHz ultrasonic booster: Branson 900 series, purple aluminum, fair condition* (MN)
 1000 watt ultrasonic converter: Branson 902JA, 20 kHz, fair condition, s/n - NQ50328A* (MN)
  ultrasonic converter: Branson 902J, elongated lug holes, s/n - NQ50328A
 2000 watt ultrasonic converter: Branson 922JA, excellent condition* (MN)
ultrasonic welder: Hermann, actuator, converter, booster, Dialog 2012 power supply, palms, manual* (MN)
   350 watt ultrasonic welder: Branson 943M power supplies, 40 kHz, RF & control cables, 220/1/60* (MN)(7)
   650 watt ultrasonic welder: Sonobond Sure Weld 635, 35 kHz plastic welder, press with palm buttons, UGE35-6 control, RL power supply, manuals & tooling* (MN)
   700 watt ultrasonic welder: Branson 941AES intelligent actuator (5), Branson 947M power supply - needs repair (1), 40 kHz, RF cables, converters & boosters, Branson columns, 1991-1997* (MN)(5)
   700 watt ultrasonic welder: Branson 947M Advanced power supply, 40 kHz, pricing, cover removed* (MN)
   900 watt ultrasonic welder: Branson 184P power supplies (2), 801 actuator (1), RF cables, 2000 kHz* (MN)
   900 watt ultrasonic welder: Sonobond 351 press/actuator, PCSIIGM35-900 microprocessor power supply, MW935 35 kHz metal welder* (MN)
 1000 watt ultrasonic welder: Branson 901 AES actuator with base & palms, 910M power supply with RF cables, 902J converter, booster, EC-1 communications port, tools, excellent* (MN)
 1000 watt ultrasonic welder: Branson 910IW, 20 kHz, silver booster, 902J converter, 1994* (MN)
 1000 watt ultrasonic welder: Branson 910IW+, 20 kHz, gold booster, 902J converter, 1998* (MN)
 1000 watt ultrasonic welder: Branson 900AE actuator, 1995-1996 (2),  Branson 910M power supply, 20 kHz, some RF cables, converters & boosters, Branson columns, 1991-1995* (MN)(6)
 1000 watt ultrasonic welder: Branson 910IW, 20 kHz, 902J converter & booster, inside electrics, 1995* (MN)
ultrasonic welder: Dukane 43A250 w/Ultracomm, temporary specifications* (MN)
 1000 watt ultrasonic welder: Dukane 43A255 actuator, 20T1000 power supply, 110-3122 converter (2)* (MN)
 2000 watt ultrasonic welder: Branson 920IW+, 20 kHz, weld by distance, base with palm buttons, converter, gold booster, very very clean, control keypad, control lit, stack test, air controls, 1996* (MN)
 2000 watt ultrasonic welder: Branson 920IW+, 20 kHz, 922JA converter, gold booster, very clean, from original owner, 1996* (MN)
 2000 watt ultrasonic welder: Branson 921AES intelligent actuator & column, no base, RF cables, converter, booster* (3), 920MA Advanced power supply, 1995-1997* (3)(MN)
 2000 watt ultrasonic welder: Dukane 43A255, 20 kHz, 20A2000 power supply, finger touch controls* (MN) 
 2000 watt ultrasonic welder: Dukane 43A255 Ultra Heavy-Duty press/thruster, no power supply, 20 kHz, 1995* (MN)
 2000 watt ultrasonic welder: Dukane 43A255 Ultra Heavy-Duty press/thruster, rf cables, 7" stroke, 1997* (MN)
 2000 watt ultrasonic welder: Branson 920IW, 20 kHz, 922JA converter, gold booster* (MN)
 2000 watt ultrasonic welder: Branson 920IW, 20 kHz, 922JA converter, silver booster, 1996* (MN)(3)
 2000 watt ultrasonic welder: Dukane 43E255 actuator, 20T2000 power supply, RF cables* (MN)(4)
 3000 watt ultrasonic welder: Stapla Condor ST30, ST3000 digital generator (power supply), converter, RF cables, palm buttons, system one, system two, system three, 2000* (MN)
        900# vibration tester: Ling 1512 shaker, 12" table, 900# sine force, 750# random force, Ling 712939-120 5R-S control w/CRT, Ling DMA2/1512-2 amplifier, 15 KVA input, 13 KVA output,  power & control cables, shaker s/n - 30* (MN)
        900# vibration tester: Ling Dynamic Systems V722 shaker, 900# sine/750# random force, 1" stroke, 9.5# armature, air cooled, 3.11 KVA amp, DVC4000S control, 1997* (MN)
     6000# vibration tester: Unholtz-Dickie T-513 electrodynamic shaker, 6000# sine force/3000# random force, unitized base with 24" x 24" slip table, 1" stroke, 12" diameter table, 36# armature, TA117-60 solid state amplifier (water cooled) , Schlumberger 1210 random vibration controller, Hauck TBA-20-10-5 blower, power cords, power cords, 198x* (MN)
     8,000# vibration tester: Unholtz-Dickie T1000 electrodynamic shaker (air cooled), 1" stroke, 16" diameter table, 90# armature, 310# maximum sine payload, TA-116-80 solid state amp (water cooled), 480/3/60, 65 KVA, SP7 manual servo controller, OSC-1S sweep sine generator, trunnion base, 8000# sine force, 4000# random force, blower, recently arrived, rebuilt mid 1990's, new 1976
   30,000# vibration tester: Ling #249 electro-dynamic shaker, 30,000# sine/24,000# random force, 1" stroke, 28" table, water cooled, 28,800# weight, 197x* (CA)
vibration welder: Branson CV12 orbital, 18" x 18" platen, 37" clearance, 12" drive platen, 13"-19" opening, 0-700# clamp force, light curtains, opto touch sensors, 1995* (MN)
      LV-38 vibration welder: Vinton linear, 19-1/2" x 38" lift table, hydronamic drive head, missing PLC, I/O;s and Moog valve, has Panelview 1000, 480/3/60, rebuilt, s/n - NA-VB107* (MN)
 LVW-4822 vibration welder: Bielomatik linear, electro-mechanical, 30 KW Lenze digital vibration drive, 180-240 Hz resonant frequency with auto search), 0.2-1.55 mm amplitude, 60 kg maximum tool weight, 54" x 22" clamp area (lift table),  33-1/2" x 19-3/4" vibration clamp area, 15-30 second cycle time, Allen Bradley SLC5/04, Allen Bradley Panelview 1000, weld by distance, 35 KW load, 480/3/60, sound enclosure, access lift gate, finger actuator, installed 2004, 2002*(MN)
 LVW-4822 vibration welder: Bielomatik linear, 47" x 20" max part size, 30 KW Lenze digital vibration drive, 180-240 Hz resonant frequency, 0.2-1.55 mm amplitude, 60 kg maximum tool weight, 54" x 22" clamp area (lift table), 33-1/2" x 19-3/4" clamp vibration clamp, 15-30 second cycle time, Allen Bradley SLC5/04 PLC, Allen Bradley Panelview 550 interface, weld by distance,  electrical cabinet, software backups & manuals, 32 KW load, 480/3/60, 2005* (MN)
  LVW-7SA vibration welder: Vinton linear, 20" x 36" lift table, hydronamic drive head, Moog valve, rebuilt in 2/2001 schematics, missing Allen Bradley plc control, old control legend, Panelview 1000 interface, software backup, light curtain, OptoTouch* (MN) (VB103-Grand Prix, s/n - 40665)
      Mini II vibration welder: Branson linear, 11 KW, .040" - .070" amplitude, 240 Hz, meltdown, tool slide, part eject, 5 second cycle, AB SLC500 & Panelview, palm buttons, 480/3/60, rear, 1999* (NY)
 VBW-3700 vibration welder: Dukane linear, AB 1336 Plus II 30 hp digital vibration drive, 24" x 52" tool size (90#-150# weight) & lift table (11.5" x 38" opening), 20" table stroke (3.6 hp hydraulic), 25" daylight, light curtain, weld by distance, finger actuators, Allen Bradley SLC5/03 PLC & AB 600 color touch screen, setup mode, set load position, auto tuning, 4-rail table slide system, 480/3/60. 600/400/3/60 transformer, 7000#, 457 production hours, new 2006* (MN)
       VW-4 vibration welder: Branson VW90-4, linear, 21" x 34" lift table w/12" x 16" slot, electro-mechanical drive, Emerson Prism 5 hp DC drive, 240 Hz, weld by distance, motorized table elevation, Allen Bradley Slick 500 (SLC500) plc & DTAM interface, light curtain, electrical cabinet, Optotouch, right hand control, 460/3/60 w/transformer*(MN)
       VW-4 vibration welder: Branson VW90-4, linear, 21" x 34" lift table w/12" x 16" slot, electro-mechanical drive, Emerson 7-1/2 hp,  240 Hz, weld by distance, motorized table elevation, Allen Bradley Slick 500 (SLC500) plc & DTAM interface, light curtain, electrical cabinet, Optotouch, rear view, 460/3/60 with transformer, left hand control, under power* (MN)
       VW-4 vibration welder: Branson VW90-4, linear, 21" x 34" lift table w/12" x 16" slot, electro-mechanical drive, Emerson Prism 5 hp DC drive, 240 Hz, motorized table elevation, Allen Bradley Slick 500 (SLC500) plc & DTAM interface, light curtain, electrical cabinet, Optotouch, right hand control, 460/3/60 w/transformer, 6-1/2' x 3-1/2' x 8-1/2'H*(MN)
       VW-4 vibration welder: Vinton LVW-4S linear vibration welder, hydronamic drive head, Moog 760Y913-534 valve (Hydraulic amplifier) , 40" x 20" lift table (hydraulic) , digital weld control, process control, weld height, weld time (with meltdown), light curtain, part eject/knockouts, hydraulic pump, palm buttons, cycle counter, electrics, GE controller, 1992*
      VW-4L vibration welder: Branson linear, 17 hp Vectron DC drive, 18" x 33.5" maxiumum part size, 18" x 30" drive platen (12" x 15" opening), 35# drive fixture (50# maximum), 21 x 33.5" lift table, (11.5" x 23.5" opening), 20" variable (hydraulic) stroke, weld by distance, pnuematic table clamping, light curtains, palm buttons, Allen Bradley SLC5/05 PLC, (powered), Allen Bradley Panelview 550 touch screen interface, 480/3/60,  5 second dry cycle time, 2001* (MN)
       VW-6 vibration welder: Branson 90 series, linear model 9610 45" x 25-1/2" lift table,  electro- mechanical drive head, Emerson Laser 7-1/2 hp drive, 240 Hz frequency, table elevation motor, 1992* (MN)
       VW-6 vibration welder: Branson linear, VW90-6, 21-1/2" x 46" lift table w/11-1/2" x 32" slot, 20" stroke, weld by distance, electro-mechanical drive head, Commander 10 hp digital vibrator drive (lit up), 180-240 Hz (variable), Allen Bradley SLC500 plc, DTAM interface, 460/3/60, load sentinel, light curtains, controls lit up, 34 KVA transformer, part hold downs, 7' x 3-1/2' x 8'5" H, new 1992* (MN)
       VW-6 vibration welder: Branson 96DVW6, linear vibration welder, 45" x 25.5" lift table, 22" stroke,  electro-mechanical head, Commander CDE 15 hp drive, 240 Hz frequency, .040"- .070" variable amplitude, motorized table elevation, 480/3/60, Allen-Bradley Panelview 1200 control, manual/automatic/tooling setup, SLC 5/04 CPU, light curtains, 1996* (MN)
    VW-6UH vibration welder: Branson Ultra Hy-Line, linear, 15 hp Commander digital vibration drive, 20" x 48" part size, 80# top tool weight, 22" x 46" lift table, 20" table stroke (hydraulic) 11.5" x 38" central opening, weld by distance, Allen Bradley SLC5/04 PLC, statistical process control, light curtain, finger actuators, rear access doors, 480/3/60, Xycom color touch screen, setup screen,,, self tune screen, system parameters screen, parameter configuration screen, 1998* (MN)
     6 cu ft vibratory finisher: Harper Electro Deburring EDV-6 tub type, 40" x 12" x 16" deep, urethane lined, timer, discharge, 3 hp, variable speed, liner like new, forward/reverse switch, 1981* (MN)
   30" dia. washer, parts: Landa SJ-150 front loading, 14-1/2" above lower 30" basket & 17-1/2" above upper 30" basket, oil skimmer, 104 gallon tank, 180F temperature, 5 hp pump, 10/100 gpm, timers, 1998 (MN)
          40" washer, parts: Better Engineering F-4000-LXPZX "Purifier" Jet Washer, (2) 40" diameter baskets (1500# lower/200# upper), 60" work height, 26-1/2" bottom basket height, 27-1/2" top basket height, front loading, uses 130F-180F water & detergent, 10 hp pump, timer, ARC-11 rinse system, oil skimmer, 1997, interior repainted with enamel* (MN)
  300 amp welder, mig: Hobart RC-301 power supply, 2000 wire feeder, temporary specs* (MN)
       .040" wire forming: U.S. Baird 00 fourslide, 7/16" strip width, 4-1/4" feed, 100-500 spm, straightener, Durant counter, speed control, missing forming slides,  2000* (MN) (2)
32-8 AWG wire stripper: Eubanks 2900, strips 1" & up lengths, electrics, inch/metric, prefeeder, counter, tag* (MN)
           8" woodworking, jointer: Northfield 8-LD, 10" x 73" table, 3 hp, 230/460/3/60, 1965* (MN)
           8" woodworking, jointer: Northfield 8-MD, 10" x 76" table, 3 hp, 230/460/3/60, rear view, 1989* (MN)
    2" x 6" woodworking, moulder: Stetson-Ross XL, model 628, four sided, 15 hp cutterhead, 8000 rpm spindle, 5 hp cutterhead, 1-1/2 hp variable speed feed (20-70 fpm), belt drive, 1978* (MN)
Back to Top Call 651-731-1969 or e-mail smt25@comcast.net for Details
  qix 
game paradoxical commandments wikipedia fire lookouts american theocracy